Who Else Wants To Be One of
Only 20 14 People Today To Own
A Custom AR-15 That’s BETTER Than
The Current Rifles Issued To
Special Operations Soldiers?
Alabama gun manufacturer announces a brand-new approach to producing the ultimate AR-15:
>> Quality Craftsmanship: Each rifle hand-built to exacting specifications with exhaustive quality control
>> Match-Grade Precision: Every rifle tested and GUARANTEED to shoot sub-MOA or better groups
>> Combat-Grade Durability: Every rifle backed by a LIFETIME GUARANTEE to give you confidence in your life-saving tool
SELLOUT WARNING:
Only 20 14 Rifles Left
Dear Fellow Patriot,
If you want to own a custom AR-15, hand-built by one of the world’s most knowledgeable and elite rifle builders…
That’s lightweight…
Guaranteed to be “combat grade” durable and fire tens of thousands of rounds without malfunctions…
With the lowest recoil, and flattest shooting design possible…
AND with guaranteed 1 MOA or better accuracy…
Then… please read this invitation now, before the rifle I have reserved for you is taken.
There are only twenty of these rifles available, so please take the time to read this message and respond immediately – because I’m sure this offer won’t be here if you leave this page and choose to come back later.
My name is Caleb Lee…
You may know me as the #1 Best-Selling author of “Concealed Carry 101″…
Or the author of numerous home-study courses on how to build “Ghost Guns” like my Underground AR-15 course…
Or you may know I founded an elite firearms training school in Alabama called the Patriot Training Center, where we train civilians how to shoot pistols and rifles at a higher level than law enforcement and military standards…
However, I’m sending you this invitation today about something even more exciting…
Introducing:
The Patriot Patrol AR-15
Today, I’m proud to announce the first firearm available for limited-release from my boutique gun manufacturing firm PTC Armory:
The Patriot Patrol AR-15!
And if you’re lucky enough to be one of the first 20 people to respond to this message, then you can take this amazing rifle home with you…
Along with over $1,773 in FREE gifts and bonuses!
More on that in just a moment…
But first…
I need you to understand, this is not just some “Entry Level” AR-15 that you can pick up for $1,500 or less at any gun store…
You won’t find it in any gun shop, and it’s only available here on this private website…
In fact, this rifle was designed specifically to meet the exacting standards and uncompromising quality of our entire instructor cadre here at Patriot Training Center…
In other words…
This rifle is designed to work reliably the moment you take it out of the box, to be as accurate as mechanically possible, and to continue to run without a single hiccup for thousands of rounds during multiple days of intense firing schedules…
That way, if you ever find yourself in a situation where you need your rifle to defend your life or the lives of the people you love—you’ll have absolute confidence in your carbine…
Building the ultimate quality AR-15 became and obsession for me because I run a full-time firearms training school called the Patriot Training Center, where we offer intense, high-round count, 2-Day Rifle Training Courses to civilians from all over America…
Where they fire hundreds of rounds per day with their rifles…
It’s intense, “tactical” style shooting—meaning multiple, rapid shots on target…
And completely unlike the way most people use their AR-15’s during a plinking day at the range where they may fire one or two magazines in a relaxed setting and think their rifles are reliable.
The fact is:
Our instructor cadre have seen numerous “big brand” AR-15’s completely FAIL to make it through our 2-day courses…
Everything from the budget, super-high volume, lowest-price AR-15’s…
To the same big brand name AR-15’s that supply many police departments across our great nation…
(I can’t mention exact names for legal reasons)
But these companies are household names, some are public companies, and many of these rifles simply quit working when subjected to the intense training we do here at our training facility in Alabama.
That’s not what you want, when you’re choosing a potentially life-saving tool…
Which is why I spent months of time and thousands of dollars of my own money to start my own firearms manufacturing company called PTC Armory.
It’s also why I’m so proud to announce our very first firearm, the Patriot Patrol AR-15.
The True Brains Behind This Custom AR-15 Is Our Elite Rifle Builder, Carter…
Carter is not only the head Assistant Instructor here at Patriot Training Center, but he also is our head armorer…
What most people don’t know about Carter is he has been working in custom gun shops, since BEFORE he was even legally allowed to buy a gun as a teenager!
He started at the absolute bottom, sweeping floors and doing all the “grunt” work to earn the privilege of working on custom guns…
He worked his way up, by putting in 16-hour days…
Paying attention to every single step, every single trick, and sucking the knowledge out of every gunsmith and armorer he worked with at that custom firearm manufacturer…
From CNC machining… to trigger jobs… to stippling… trouble-shooting factory-built guns that customers had ruined trying to do their own gunsmithing… and cerakoting for (literally) thousands of hours…
Carter has an amazing amount of experience working on custom guns…
Particularly the AR-15 rifle.
For example, at his last job, he helped spec out, hand-build and deliver multiple customized rifles for local SWAT teams to meet their exacting and specific CQB and Sniper needs…
What’s more, because he’s obsessed with building the ultimate rifle—he’s also taken multiple advanced Armorer courses to expand his knowledge from today’s best gun builders, such as the Sons of Liberty AR-15 Armorer’s Course:
In short, Carter knows EXACTLY how to build a gun for hard-use, real world shooting to an extreme level of accuracy and reliability.
The Patriot Patrol AR-15 Was Built To Offer You
A True “Do-It-All” Platform Capable From 0-600yds…
This AR-15 was designed from the ground up as a true “do-it-all” carbine that could effectively handle all the requirements of the Modern American Patriot…
Whether you just need the most reliable, ergonomic, compact and fast-handling carbine available for Home Defense at CQB (Close-Quarters Battle) distances…
Or you’re looking for a rifle you can sling and take into the mountains, or on patrols, and need the extreme 1-MOA or better accuracy only a finely-built rifle can provide…
This AR-15 can handle any and all duties from 0-600yds with proper ammo and optics…
It’s compact and light enough that it’s great for home defense…
And accurate enough—1MOA or better—that you can “reach out and touch” practically anything you can see!
So, the first criteria of a “do-it-all” platform was met, but the second criteria may have been even more important…
The Patriot Patrol AR-15 was designed to be one of the most reliable, duty-grade, “combat ready” rifles available today.
Every single part was chosen not just on increasing the performance and lethality of the total package…
Not just to build the lightest, easiest handling, most accurate and low-recoil platform possible…
But every single part had to work together in unison to increase the overall reliability and durability of this rifle.
Any part that was unsuitable for “duty use” was immediately discarded and taken off the table…
Because first and foremost, this AR-15 was designed to be life-saving tool, that is guaranteed to flat-out WORK from the moment you take it out of the box…
To 30-years from now, after you’ve put tens of thousands of rounds through it, when you pass it on to your grandchildren, even under the harshest conditions and most hostile environments imaginable.
In short, the Patriot Patrol AR-15 was designed to be THE AR-15 you reach for in the gun safe when your life or the lives of your loved ones are at stake and you need a rifle you can trust.
That was the goal, the concept, the obsession that drove this project forward…
And I’m proud to say we achieved it.
Here’s how…
It starts with hand-picking every single quality part, while ruthlessly eliminating inferior components…
*** LOWER RECEIVER:
SPECS: Precision machined to correct Mil-Spec from 7075-T6 forged Aluminum, with Mil 8625 Type 3 Class 2 Matte Black, Hard Coat Anodized Finish.
What this means to you is this lower receiver meets and exceeds all the various “Mil-Spec” standards for reliability, functionality, strength and compatibility. What’s more: these precision-manufactured receivers are emblazoned with our PTC Armory logo, featuring an American Patriot with his pistol and a rifle below.
*** UPPER RECEIVER:
SPECS: Precision machined to correct Mil-Spec from 7075 T6 Forgings extension with Laser Engraved T-Marks along Mil-Std 1913 Rail for mounting optics and accessories. M4 Feed Ramps. 8625 Type 3 Class 2 Matte Black, Hard Coat Anodized Finish.
What this means to you is the entire upper receiver has been precision machined to fit perfectly with the Mil-Spec lower receiver and M16 “full-auto” Bolt Carrier Group (BCG). But we didn’t stop there, because the Upper Receiver has been trued and then the barrel has been press fitted for maximum accuracy potential.
*** BARREL:
SPECS: 4150 Chrome Moly Vanadium Steel, 5.56 NATO, 1-in-7 twist, 16″ Lightweight Performance Profile. HP and MPI tested, with QPQ Corrosion Resistant Exterior Finish and a Recessed 11 Degree Target Crown.
What this means to you is — quite simply – your lightweight barrel will have the maximum accuracy, reliability and longevity you want for a life-saving AR-15.
It’s precision machined to achieve a performance, lightweight profile in 16” length that is thicker near the chamber for balance and durability but thinner in profile towards the muzzle. In short, you get all the durability and heat mitigation benefits of a heavier barrel, but in a lightweight profile weighing a mere 28.2oz.
The Mil-Spec 1:7 twist means you can stabilize the absolute widest range of ammo, including the heaviest grain bullets (such as the MK262 77 grain “Sniper round” that can make hits at 1,000 yards) and all lighter 45gr, 55gr, and 62gr ammo…
It’s made of 4150 CMV “machine-gun grade” steel (the Mil-Spec standard) meaning instead of your barrel starting to lose accuracy or even keyholing after 5,000 to 10,000 rounds (like lesser, 4140 “standard gun shop AR-15” barrels depending on coatings) – your barrel will stay accurate all the way up to 30,000 to 50,000 rounds. A QPQ corrosion resistant exterior protects against the elements.
Finally, the Recessed 11-Degree Target Crown is part of what enables us to guarantee 1-MOA or better accuracy from your rifle.
*** GAS SYSTEM:
SPECS: Low Profile Pinned Gas Block, Mid-Length, Direct Impingement System.
What this means to you is you’re getting the best shootability, reliability, and recoil reduction available in a “carbine” package. Essentially, the longer the gas-system the more reliable the AR-15 platform, but because the 20” barrel and rifle gas of a full rifle is not ideal for a light, easily carried and maneuverable defensive rifle—our “Patrol Rifle” concept—the mid-length gas system with a 16″ barrel is the perfect solution (and any shorter of a rifle barrel is illegal without NFA paperwork, tax stamps, or pinning-and-welding a permanent muzzle device to your barrel). Direct Impingement (DI) was chosen over a Gas Piston system because it’s the Mil-Spec standard and offers greater part interchangeability, reliability, lighter weight, lower recoil and easy replacement parts in a “Grid down” scenario. And the low-profile Gas Block is properly pinned for reliability, and the entire gas system easily fits under the modern, slim handguard.
*** MUZZLE DEVICE:
SPECS: Removable Mil-Spec A2 Flash Hider.
What this means to you is this classic Mil-Spec Flash Hider does a great job at protecting your eyesight by diminishing the flash you see at night. It also works well to reduce your visual signature to anyone else (the enemy). Because we wanted to give you a choice to run other types of muzzle devices (if you decide you want to use a silencer or particular muzzle brake), the proven A2 Flash Hider is the perfect solution.
*** BOLT CARRIER GROUP (BCG):
SPECS: M16 Profile, Mil-Spec HPT and MPI tested and marked, “full auto” carrier machined from AISI 8620 aircraft quality steel, chrome lined, hard-chromed lined gas key and bore. Carpenter Technology 158 steel bolt. 4140 Steel Extractor. Mil-Spec O-ring, gas rings, 8740 steel firing pin with hard chrome finish.
What this means to you you get the maximum performance from what is probably one of the most important parts in the AR-15. Quite simply, you get the superior features and attributes of a truly Military Grade M16 Bolt Carrier Group (BCG). You get better reliability because of the proper cycle time of the rifle using this heavier “full auto” M16 Profile Bolt Carrier Group (BCG). Plus, the High-Pressure Testing and Magnetic Particle Inspection (HP/MPI) means you can trust your life to the reliability of this crucial part (the BCG is considered the “heart” of the rifle that often fails in lesser AR-15’s). Key features to also note are the full auto profile 8620 steel carrier is properly Mil-Spec chrome-lined, and a Carpenter Technology C-158 steel bolt, along with 8740 steel firing pin are utilized. What’s more: if there is ever a chance to convert to (legal) full-auto in the future—your BCG will be robust and ready.
*** BUFFER:
SPECS: Mil-Spec H2 Carbine Buffer.
What this means to you is the buffer and spring system works together with the entire mid-length gas system to give you added reliability with virtually any ammunition you fire (the entire system virtually eliminates over-or-under gassing problems). The H2 weight is optimal for this mid-length, 16” barrel, with Mil-Spec BCG. Plus, this particular H2 weighted buffer system helps reduce felt recoil as well, giving you a much flatter, straighter shooting rifle.
*** RECEIVER EXTENSION:
SPECS: Properly Staked Mil-Spec Carbine Receiver Extension (Buffer Tube). 6-Position machined from 7075T6. Hard Coat Anodized per Mil-A-8625F, Type III, Class 2.
What this means to you is you get the maximum adjustability for your height (or spouse and kids) along with a more reliable, lower-recoil rifle when this buffer tube is paired with the H2 buffer system. Mil-Spec receiver extensions have a slightly smaller dimension which only fits Mil-Spec compatible stocks (USGI, BCM, COLT, Magpul, etc). Because you get one more position of adjustment for length of pull (stock length) with 6 positions instead of 5 making it more versatile and adaptable to your height or the height of anyone who shoots it with just a quick adjustment. And it works with the specialized buffer and springs to reduce felt recoil even further. And like all the parts chosen for this rifle it functions alongside them to increase the total reliability of your rifle. Finally, the castle nut is properly staked per Mil-Spec guidelines.
*** SIGHTS:
SPECS: Magpul MBUS Back-Up, folding Sights front & Rear fully adjustable.
What this means to you is your rifle comes ready to shoot “as is” with these flip-up sights even though it features the M4 “flat top” style Mil-Std 1913 Rail for mounting optics and accessories. You can take it out right out of the box and start nailing targets out to hundreds of yards with these flip up sights!
What’s more: in the future if you decide to upgrade to an optics system (either red-dot or some type of scope) you can either “co-witness” with your red dot system… or… fold down the sights so they’re out of the way but can be quickly popped up into action if your optic fails as BUIS (Backup-Iron-Sights).
*** CHARGING HANDLE:
SPECS: Radian Raptor-LT Ambidextrous Charging Handle.
What this means to you is you get even more reliability and better ergonomics with this improvement over the Mil-Spec charging handle, plus easier ambidextrous manipulation (especially when using gloves). The Radian Raptor-LT handle has extended latches making it easier to operate your charging handle with one hand (without being too big that it catches on clothing, load-bearing-gear or is otherwise cumbersome when slinging the rifle). Raptor-LT handles are machined from 7075 aluminum, MILSPEC Type III hard anodized, then over-molded with high-strength, fiberglass reinforced polymer for the ultimate combination of strength, weight, and durability.
*** HANDGUARD:
SPECS: Midwest Industries G4 Low Profile 13.4” free float rail featuring Seven sides of M-LOK and five Anti-rotation QD Sling Sockets. 6061 Aluminum Type 3 Hard Coat Anodized.
What this means to you is you get lighter weight, more reliability, more accuracy, and more customization and accessory choices.
First, because this is a free-float rail, your barrel is not touched by the handguard which increases the accuracy of the rifle. This is especially important when bracing against objects to make accurate shots. Second, because this rail is rigid, yet lightweight, aluminum and free-floating (instead of the cheaper, non-free floating plastic handguards) it protects the delicate gas system which if its damaged, even slightly, can cause the AR-15 platform to malfunction.
This rail utilizes Magpul’s M-LOK™ standard for the direct attachment of accessories wherever YOU need them on your handguard, without having rails covering the entire gripping area (and with attachment points on 7 sides, the full 13.4” length gives you plenty of room). Finally, there are 5 integrated Anti-Rotation QD sling socket mounts included, so you can mount your sling however you prefer on the handguard.
In short, you have more control of how you want to customize your handguard, with one of the lightest and strongest rails available which protects and accurizes your rifle even more.
*** BUTTSTOCK:
SPECS: B5 BRAVO Stock.
What this means to you is, you get one of the most popular buttstock upgrades in use by Special Ops everywhere in the world. It builds upon the success of the B5 Systems Enhanced SOPMOD stock, but improved to be lighter, more compact and stronger. You get the same SOPMOD cheek weld, one-piece anti-rotation quick disconnect sling mount, no slip cushioned buttpad, and improved sure grip stock latch, but the Bravo is slimmer because it has no storage capacity and also angles the rear of the stock for quicker and more consistent mounting of the rifle.
*** PISTOL GRIP:
SPECS: B5 Systems Type 23-Grip increased vertical grip angle, aggressive texture, and extended tang to improve ergonomics and ensure proper trigger index.
What this means to you is you’re getting one of the most popular grips in use by operators the world over. Elite forces like this style grip because the more vertical grip angle works with well with carbine or shorter rifles. It also has a unique backstrap angle, aggressive texture, and ergonomics allowing you to get proper finger placement easier on the rifle—more consistently. Plus, the grip contains a storage core that can accept a plug to carry spare batteries for optics or other essentials!
*** TRIGGER:
SPECS: Geissele Automatics Advanced Combat Trigger (ACT).
What this means to you is you’re getting the absolute BEST “Mil-Spec style” trigger available! The ALG Defense Advanced Combat Trigger (ACT) is designed to mimic the Mil-Spec trigger, but improved in every way. The ACT trigger breaks sharper and the grittiness of the USGI trigger is removed. The pull weight is not lower than the M4/M16 minimum weight specification of 5.5lbs. Trigger and hammer are made from true 8620 alloy steel military specification castings, correctly carburized, quenched and tempered for high surface hardness. Disconnector is 1070 High Carbon steel properly Austempered into the spring range of hardness. Full-force springs (for positive ignition of all types of ammo) are corrosion resistant and meet military specifications. Trigger and hammer pins are improved over stock mild steel by using 4140 Chrome-Moly steel that has been quenched and tempered—then centerless ground to diameter 0.001” larger than stock to reduce play in the trigger assembly while retaining a slip fit into the lower receiver. Finally, “HardLubing” is ALG’s term for electroless Nickel plating with an integral modifier to the base nickel plate. Either Boron or Teflon is used to enhance surface hardness, wear resistance and corrosion resistance and also create favorable tribological properties of the trigger components—leaving the trigger a pleasing matte light grey color. (And if you don’t love it, it’s as simple as swapping out a stock trigger for your favorite upgrade.)
*** FINISH:
SPECS: Everything Mil Spec Anodized, then professionally Cerakoted matte black, unless otherwise noted
What this means to you is you get a rugged finish and the guarantee that your rifle will take almost any punishment you can give it and still look brand new. All the parts are precision machined and coated so that they still meet Mil-Spec measurements after their coating (a lot of cheaper manufacture’s parts are Mil-Spec dimensions after machining, before the hard-coating, but the coating slightly changes their dimensions making the entire rifle fit together “sloppy”). Finally, a professionally applied Cerakote finish is given to your entire rifle—it’s essentially a ceramic-based layer of “armor”—that protects against abrasion, weather, chemicals, and increases durability. In short, the finish on your rifle will last for years and years even under the toughest shooting and abuse you can throw at it.
*** PROUDLY HAND-BUILT IN THE USA, in the small town of Eastaboga, Alabama!
SPECS: Every rifle individually hand-assembled by ONE armorer from box of parts to test-fire and shipping to you.
What this means to you is that instead of a rifle built by a company that’s only focused on producing as many rifles as possible, as quickly as possible and as cheaply as possible… you get the attention to detail, hand-built, reliable quality that can only be achieved by a single individual armorer building your entire rifle from after the moment you order, until it hits your doorstep. Your armorer will test-fire, date and sign as a statement of quality that your new rifle will perform as advertised. And if there are ever any problems, we will know exactly who built your rifle and who needs to fix it! Plus, you get the pride and satisfaction of supporting a 100% American owned company employing skilled, American workers!
The Difference Between A High-Volume “Assembly Line” Factory Rifle And This Hand-Built AR-15
When you walk into your local gun shop you will most likely see dozens of AR-15’s…
And they range all over the map in price and quality even though they’re the same basic design and platform—so why is there a difference in price and so many brands?
It comes down to, first, the individual components used in the rifle and their quality—all of which determine accuracy, performance, reliability and the lifespan of the rifle.
Even more important…
In fact, this is probably the MOST important factor…
There is a HUGE difference between rifles that are built on a large scale, much like a gigantic car factory utilizing “assembly line” methods…
Versus the hand-built, step-by-step, methodical method we use to build the Patriot Patrol AR-15…
First, we carefully selected each and every part so that they work together—synergistically—towards our ultimate goal of building the ultimate “do-it-all” rifle…
Then your rifle starts its life as a box full of parts…
The first step is a quality-control inspection of every, single, part.
Each part is inspected—by hand—by Carter…
To make sure certain parts are in “spec”, calipers and gauges are used extensively to measure for exacting tolerances…
Again, every single part must meet or exceed the Mil-Spec guidelines…
So, every single part needs to be checked to see if it meets our quality control process BEFORE building even starts.
You see, we live in amazing times where there are a vast number of manufacturers making components for the AR-15 platform, which is a blessing and a curse…
It’s a blessing, because there has never been more access to more, different, improved AR-15 components…
It’s also a curse, because tolerance stacking and improper quality control processes lead to failures right out of the box with many of these parts…
Worse, if multiple parts are even slightly out of tolerance… then when combined together… these small imperfections quickly add together and can make your entire system unreliable.
That’s why our inspection process is so critical BEFORE we even begin!
For example…
We have had to send back barrels to the manufacturer because the gas hole sizing is .0019 too big…
Most gunsmiths or home-builders would not measure or care about such small details, but we know it’s absolutely critical for proper functioning of a rifle you can trust with your life…
That’s why every part is measured, tested and inspected before we start.
Only once we have the right parts, verified they meet our high-standard of quality after careful inspection, can we begin…
Then, and only then, are all the parts cleaned, prepped, and prepared for assembly…
And at this point, it’s a truly hand-built process…
Each part is methodically assembled, taking extreme and meticulous care in fitting, alignment, and securing…
For example, nearly every important part of an AR-15 has an official “Mil-Spec” torque spec…
Lesser gunsmiths, armorers, and home builders use the “monkey tight” method…
But each part has a very specific torque spec that should be followed for maximum reliability and function.
This process continues for many hours…
Step-by-step…
Until finally, a functioning, complete AR-15 is produced.
But the process doesn’t stop there.
Multiple function-checks are then performed to ensure everything is in working order…
And then another round of, redundant, checks for proper torque specs on crucial parts is performed…
When This Exhaustive Build Process Is Complete,
Your Hand-Built Rifle Is Then Test-Fired For Guaranteed Reliability!
The bottom-line up front?
We won’t ship your rifle, unless we test it first, to make absolute sure it works.
It’s a crucial, final step, in our quality-control process.
We NEVER want you to get your brand-new rifle out of the box and experience a lemon!
(As such, keep in mind that your Bolt Carrier Group (BCG) and other parts may show handling marks consistent with these quality control checks.)
And the way we test-fire your new rifle is extremely important too…
We first test-fire your complete rifle on semi-auto to make sure it passes our initial function tests…
Then, we take a second, critical step, that most manufacturers do NOT do…
Because we are a registered Special Occupational Taxpayer (SOT) Class 7 FFL Manufacturer, we fit your upper receiver to one of our full-auto M16 converted lower receivers…
We Then Test-Fire Your AR-15 Using Full-Auto!
This is important because, to borrow a turn of phrase, “Full-auto does not lie”.
In other words…
While there could be certain imperfections in an AR-15 rifle build that would not show themselves until 100’s of rounds are fired in the future, when only shooting semi-auto…
Firing your AR-15 on full-auto is like a “stress test” that can quickly reveal any problems…
It’s like an accelerated testing process that guarantees all the parts are working together, and doing their proper job, to stand up to the most grueling firing schedule your rifle can endure…
We want to deliver you an unstoppable, 100% reliable rifle…
And full-auto testing is the best way to make sure it was assembled and inspected as correctly as possible—to get us as close to that 100% reliability mark as is humanly possible.
Of course, this is still not the end of the quality-control procedures we employ here at PTC Armory.
Once Your AR-15 Passes Our Reliability Tests,
We Make Sure It’s As Accurate As Humanly Possible!
Now, as we’ve already discussed…
We selected the optimum rifle barrel for the Patriot Patrol AR-15.
First, it’s lightweight, for a few important reasons…
As anyone who has taken multiple days of rifle training courses with long hours spent on the range…
Or anyone who has served in a law enforcement or military role knows…
You will almost always spend more time carrying your rifle, then actually shooting it!
Plus, because the modern AR-15 serves as a “platform” you can outfit to suite your particular mission needs…
We know that most everyone will add, at the minimum, a white-light to the rail. That’s an extra pound or so of extra weight added to the business end of your rifle…
But you may also need to add infrared (IR) lasers, a low power variable optic (LPVO), or even dedicated Night Vision (NV) devices and more…
Each of these adds ounces, until you’re left with a few pounds of mission-essential gear hanging on your rifle.
In short, the lighter the rifle you start with, the lighter and better handling the rifle you end up with AFTER you add what you need.
That’s just one reason why a lightweight rifle is extremely important.
It’s why we went to such great lengths to search for the optimum barrel profile possible…
Because we didn’t just want a super light barrel that was unreliable…
And we definitely did not want a barrel that was not accurate…
The fact of the matter is, in our prototype rifle builds we tested no less than 5 different barrels we thought met our standards…
But only one really met our requirements…
We painstakingly settled on a performance barrel profile that was as lightweight as possible…
Within just 2 ounces of a full “pencil” weight barrel profile…
So, you’re getting the lightest barrel weight possible… WITHOUT sacrificing accuracy or durability!
However, unlike a full “pencil” barrel…
You Get All The Accuracy And Durability Advantages of a
Heavy-Profile Barrel, Without The Extra Weight!
The Patriot Patrol AR-15 barrel is built for hard-use and is more rugged and durable than a full pencil-weight profile…
Because the barrel we selected has just a few more ounces in the area where it REALLY counts—with this extra weight and material near the chamber to help dissipate heat better.
This means it will heat up slower than a pure “pencil” profile barrel…
Then the profile of the barrel tapers, symmetrically, removing any unnecessary material the further towards the muzzle to allow for the lightest weight…
In addition, this unique barrel profile essentially optimizes “barrel harmonics”—allowing the barrel to quickly return to “home” at rest after each round—enabling faster follow-up shots at high rates of fire (even full-auto!)
In short, you get the rigidity and durability of a heavy barrel in a lightweight profile.
Now, the barrel we selected is only about half of the accuracy equation…
You see, it’s already produced with an excellent quality-control process and a Recessed 11-Degree Target Crown.
That makes for a great starting point, but the real magic, again, is in how we install your barrel into your AR-15 upper receiver…
Because we purposely selected an upper receiver that is ever-so-slightly (we’re talking thousands of an inch) undersized in the barrel extension…
And that means we actually have to “press fit” your performance barrel into your AR-15 upper receiver…
This tighter “press fit” actually requires a unique, proprietary method that we developed in house…
But it virtually guarantees that we’ve removed any extraneous movement and “slop” in the barrel extension…
Which can not only affect bolt flight making your gun more unreliable (because any movement in the barrel can cause improper alignment between gas tube and BCG)…
But securing and solidifying the barrel connection like this, can greatly increase the accuracy potential of the entire rifle.
Of course, as part of our quality-control process…
We Then Proof-Test Your Hand-Built AR-15
To Guarantee It Shoots Sub-MOA Or Better!
Pictured Above: First 3-shot group (including cold bore first shot) of Patriot Patrol AR-15. Group size measures 0.271 MOA.
We take a short trip up to our range and put up a 100yd target…
We put a high-powered target scope on your rifle…
Then we shoot 3 and possibly 5-round groups for accuracy.
The bottom line is that we guarantee your Patriot Patrol AR-15 will shoot Sub Minute of Angle (MOA) or less utilizing match-grade ammunition.
(We follow the industry guidelines and define sub-MOA as a group size of 1 inch or under at 100 yards with a 3 shot magazine fed group, or 5 shot single-loaded group factory ammo.)
What is so special about a Sub-MOA rifle?
1-MOA (one minute of angle, means 1/60 of a 1 degree) is a measurement unit used in long distance shooting…
Without going into too much math (because it’s not exactly 1-inch), it’s roughly equivalent to a rifle that’s capable of putting all the shots into a circle at 100yds that’s less than 1” in circumference.
In short, a rifle that is Sub-MOA accurate is VERY accurate indeed, and capable of delivering accurate hits inside a roughly 10” circle even at 1,000 yds—far outside the “effective range” of 5.56 NATO!
Pictured Above: How 1-MOA mechanical accuracy translates to accuracy capability from 100-1,000 yards.
For a “do-it-all” AR-15…
Having a Sub-MOA level of accuracy is MORE than enough, because that means your rifle is mechanically capable of making headshots on the head zone (6”x6”) of a standard IDPA cardboard torso target at 600yds!
In the real world, your accuracy would depend more on your marksmanship skills and ability to pull the trigger (not to mention reading the wind past 300yds)…
But, the important point is this is more than enough accuracy for any real-life engagement distance you might find yourself in with the AR-15 platform…
And the real benefit to having a 1-MOA accurate guarantee, is you can be sure your rifle is mechanically capable of extreme accuracy…
Which means the only variable to getting the hits you need is your fundamental marksmanship skills!
After we proof-test your rifle for Sub-MOA accuracy, we sign the target for proof and date it, then put the spent shell casings and the target together with your rifle package.
It’s Important To Realize That Every Single Part On Your Rifle Must Function Together For Maximum Reliability…
What most people don’t realize is that every part on an AR-15 should be chosen to work together with all the other parts, synergistically (a scientific word that just means each component amplifies and compliments the benefits of every other component).
One thing you don’t want to do is just pick a lot of random parts with no reason to use them together.
That’s why having someone like Carter, who has literally spent hundreds of hours assembling AR-15’s by hand and seeing how each change in the platform performs is worth its weight in gold when getting a custom rifle.
For example, you want a reliable gun that you can count on to always go “bang” …
With the AR-15, one of the most important things you need to optimize for reliability is the gas system.
If you talk to experienced AR-15 owners you will hear about “over gassing” problems with many factory rifles…
This is a problem because extra gas in the system subjects all the parts to more violent functioning than expected—leading to accelerated wear-and-tear…
(Not to mention, it increases recoil and makes it harder to get back on target with follow-up shots as fast as possible)
That’s why our goal was to design your rifle so that all the parts are selected to be reliable with the widest range of ammunition available so your rifle will always work when you need it to.
That sounds easy, but because every part of the AR-15 works together, you need to optimize several parts and have them work together.
In the case of the Direct Impingement (DI) gas system in this rifle you’re getting …
- The right low-profile gas block, installed correctly…
- With the correct, mid-length gas tube for the 16″ barrel that works with…
- The properly weighted & durable (HPT and MPI tested) “full auto” M16 bolt carrier group (BCG)…
- Teamed up with the proper “weight” buffer and spring assembly…
- Housed in the proper Mil-Spec receiver tube…
In order for the rifle to fire and the immense pressure from the burning gun powder to push the bullet out of the barrel… send gas up through the tiny hole gas hole in the barrel… into the low-profile gas block… back through the mid-length gas tube… shoving back the BCG, ejecting the spent casing… into the buffer tube and spring housed in the receiver… that pushes the BCG back into place which seats another cartridge in the chamber ready for the next pull of the trigger.
This is known as the “cycle time” and all of that typically happens in about 3 milliseconds (one millisecond is one thousandth of one second). With the combination of parts working together in unison in this rifle package, you extend that cycle rate by just a few milliseconds, which in turn adds reliability to your rifle.
In other words, with this rifle, you can shoot all types of ammo reliably…
From the cheapest, most underpowered, Russian steel case .223 ammo…
To the “hottest” military-grade M855A1 5.56 NATO.
And you get “extra insurance” that keeps your rifle running even when it’s dirty, you’re running it hard, or for any other reason
Why You Also Want A Flat-Shooting, Low-Recoil AR-15
(Even Though It’s Only a .223) …
Here’s more good news…
These same parts all working together don’t just increase reliability and durability…
They also all work together to reduce recoil and give a “flatter shooting” rifle…
Now, even though the 5.56/.223 is not a high-recoil caliber…
The fact is, it doesn’t matter how “tough” you are, a low-recoil rifle is more desirable.
For one, it’s more accurate because the rifle “shoots flat” with more of a “push” into your shoulder instead of snapping the sights off target up and away from you…
This is important, because the less recoil, the faster you can engage multiple targets or get your sights back on the same target for the next, more accurate shot…
And let’s not forget that your children or maybe smaller stature shooters (like many females) might have to use your rifle to defend your home one day. You want a rifle that shoots flat, accurate, and with little-recoil so they can be as effective as possible with the weapon. That’s one of the disadvantages of shotguns (besides being low capacity compared to a standard 30-round AR-15 magazine) – they typically kick like a mule and your wife or kids will most likely be less effective with it.
Another benefit of this low-recoil setup is if you’re shooting long-distance, especially with a magnified optic such as a scope…
As anyone who has shot through a high-power scope knows, you can barely see anything but the target (which fills up the entire scope) and your crosshairs…
With other AR-15’s at long distances and high magnification, after every shot your crosshairs will be moved by the recoil so much that it may take a moment or two to “find” your target again and line the crosshairs back up.
In contrast, with finely tuned gas-system because of the multiple recoil-reducing systems of this rifle, you simply don’t have that problem. After every shot your crosshairs will be right back on target as fast as humanly possible (making follow-up shots or multiple target engagements faster, easier and more likely to succeed).
The bottom line is:
This is the best AR-15 rifle you can buy “ready” for the modern Patriot which is why I had to own one myself after we first produced it…
It’s why Carter has one for protecting his wife and kids…
And why Jeff uses it to protect his family too.
If the you-know-what ever hits the fan, the rifle is one of the best weapons to protect yourself, your home, and your family and with the world becoming more and more unpredictable—you should own one of these elite AR-15’s.
Why We Build Your Rifle AFTER You Order It…
Remember, there are two basic ways to build an AR-15…
The first is the big-brand name “Car Factory Assembly Line” style…
They’re punching out and producing hundreds of thousands (even millions!) of AR-15’s each year…
Margins are tight and due to the extremely high production volumes, even a 1% error rate makes it extremely easy to get a “lemon” that rolls off the factory line…
Then there’s the second method which we’ve chosen to embrace…
We hand-build every single Patriot Patrol AR-15 rifle AFTER the customer orders it…
With every single properly chosen part hand-inspected, every single time, having to go through our propriety quality control process to ensure it meets our exacting standards BEFORE we ever assemble a single part…
Then, throughout the entire build process multiple quality-checks are performed during each phase of the assembly…
Keep in mind, ONE person starts, builds and completes your hand-built rifle all by themselves…
In fact, your Patriot Patrol AR-15 will be shipped to you with these three things:
- Date of manufacture
- Name of the armorer who assembled your rifle
- The Armorer’s signature guaranteeing the quality of the rifle.
This way, if you ever have any problems, we will know exactly which hands have touched your rifle and guaranteed the work, to make sure it’s fixed right for you.
We also hand-build your rifle after you order because we are a small, boutique shop and we don’t want to order a warehouse full of inventory ahead of time…
Not only is it not economically feasible, but here’s the real truth…
We’ve been working in the firearms industry for well over 10-years now (and combined, we have many more years experience)…
And the sad fact of the matter is that certain manufacturers will be “good” and produce excellent components for a period of time…
And then something happens… maybe they’re making cuts to their processes to save money… or they’re growing too fast to keep the same level of quality they did as a smaller company…
We don’t know what happens, but it doesn’t matter.
The bottom line is that, to ensure our high levels of quality control, we need to order small batches of each of our components from manufacturers at a time…
So, we can personally inspect each “lot” and make sure it meets our high standards…
That’s why we keep a lean and selectively small inventory, to keep quality standards high.
At this point, you’re probably wondering…
How Much Does The Patriot Patrol AR-15 Cost?
The truth is, the Patriot Patrol AR-15 is NOT cheap…
In fact, some people might even think it’s expensive…
But, as we all know, most quality things in life are rarely the cheapest…
Because we wanted to do this the RIGHT way, we spared no expense in our research and development process…
You see, when we set out to build the ultimate “do-it-all” Patrol Rifle for the modern Patriot, we had a great idea of the objectives we wanted it to achieve…
First, we wanted it to be 100% reliable under and any all conditions…
We wanted to make sure it would perform for tens of thousands of rounds under the hardest shooting conditions possible…
We also wanted it to be as lightweight and handy as possible…
We wanted the maximum reliability and durability from a properly gassed, low-recoil rifle that would be a joy to shoot…
Plus, we had some ideas about the ergonomics that we wanted to achieve…
While still leaving you, the end user, with as much flexibility as you desire to customize the rifle to your needs.
All that said, it was a LONG research, development and testing process to get it right…
First, we had already narrowed down our original parts manufacturers to a very small choice…
But we had to make sure they were producing parts in accordance to our standards…
Plus, we had some different ideas about certain details, so the only way to do it right was to build multiple different “prototype” rifles first…
Then take them out and shoot them, with various optics, furniture and other accessories… to see which performed best.
Certain combinations of parts – probably due to tolerance stacking – caused reliability issues and we knew immediately to discard them…
We narrowed it down to 3 prototype rifles that we built…
And took them to multiple-day rifle courses we took as students… we shot them on the range during practice… and we did a little torture-testing to round it out.
Prototype rifle 1 cost $3,804…
Prototype 2 cost $4,052…
And prototype 3 cost $2,671…
Plus, there was the thousands of rounds of 5.56 NATO we put through each one during testing and evaluation…
Before we finally selected the best-of-the-best choice which ended up being a hybrid between all three…
So the bottom line is that—just in finalized prototype rifles built—it cost over $10,527 to get the Patriot Patrol AR-15 “just right”!
But, you won’t pay anything near that today…
You might even expect it to cost $5,000…
After all, it’s a one-of-a-kind, highly customized and hand-built, purpose-driven AR-15 manufactured to meet the exact specifications of myself and my staff here at Patriot Training Center…
But the good news is, it’s not $5,000…
It’s not $4,000…
The bottom line is the MSRP of the Patriot Patrol AR-15 will be $3,500 when we fully release details of this rifle to the general public.
But because you’re on a small, very select list of people who are seeing this message…
We are making the first 20 of these hand-built rifles available for just $2,497.
Obviously, there are many, many lower priced AR-15’s on the market, but this is not a “bottom of the barrel” rifle…
It’s not one of millions of rifles produced by a huge factory…
This is a specialized instrument, a tool that’s been hand-built and lovingly produced by a truly skilled and competent American worker right here in Alabama, USA.
And it’s hand-built, just for you, as soon as you order.
Plus, it gets even better for you.
This Is The ONLY AR-15 That Comes With A
DOUBLE Performance Guarantee!
Because this AR-15 is unlike any other rifle produced by any other manufacturer…
It comes with a guarantee unlike any other guarantee.
In fact, you get two performance guarantees:
Performance Guarantee #1:
Your Rifle Will Shoot
Sub-MOA—Guaranteed!
Before your rifle ever gets delivered, one of the final steps in our process is we will proof-test the accuracy…
You are guaranteed to receive a target, signed, dated and authenticating that your Patriot Patrol AR-15 shoots 1-MOA or less.
We will also include the spent shell casings of the ammo we used to shoot your proof-tested group and the details of the ammo used (so you know the most accurate ammo for your particular barrel).
In short, your rifle is guaranteed to be accurate, or you can send it back!
Performance Guarantee #2:
Your 100% Bulletproof,
Money-Back LIFETIME Guarantee
We’re not like the big, faceless brand companies that run a pure volume game, trying to sell as many guns as possible regardless of quality…
The dirty industry secret is they know—and they depend on—their customers never firing more than 50 rounds of ammo on average from any of the guns they sell… that’s why they don’t obsess over quality like we do.
Their guns are NOT hand-built… they are mass produced.
We want you to trust your life to our rifle.
We want you to shoot your AR-15… a lot.
Most companies will stand behind their guns with at least a manufacturer warranty. That’s the minimum. It shouldn’t be broken when you get it…Of course, we guarantee your gun will work when you get it.
But we don’t stop there… We guarantee your gun for life.
Run your gun hard. Run it dirty (keep it well lubed please). Abuse it if you like… Whatever you do, don’t baby it or leave it sitting alone in the gun safe…Take it out and shoot thousands of rounds in one of our multiple-day rifle training courses…
Shoot tens of thousands of rounds every single year.
Our guns will perform for you, or we’ll make it right.
Shoot out a barrel after 50,000 rounds? Congratulations! That’s what we like to see. We’ll replace it for free. What’s more…
If you ever use your gun in a justified defensive shooting – that’s why we provide the most reliable firearms, to defend your life and the lives of those you love. Let us know and we’ll get you a replacement while you’re waiting on your investigation to finish so you can get your original rifle back.
Simply put, we are building the same gun company we want to buy from…
A company built by American Patriots that cares about producing the best firearms for American Patriots. That’s our 100% Bulletproof Lifetime-Guarantee.
As if that wasn’t enough…
You Get 6 FREE Bonus Gifts:
My goal with PTC Armory is to be the best.
To do that, we believe in over-delivering!
That’s why I’m going to also send you these valuable bonus gifts along with your Patriot Patrol AR-15 when you order today:
Gift #1:
You Get THREE Standard Capacity 30-round Mapgul Magazines!*
As soon as you get your Patriot Patrol AR-15, we want you to be so excited, you take it straight to the range and shoot it!
And of course, a gun is useless without ammo and magazines…
That’s why we’re going to give you not just one, but THREE (3) standard capacity (30-round) Magpul Magazines with your rifle. Three magazines are enough that you could get your rifle and the same day you’ll have a capable setup for home defense with everything you get in the package!
This is a $45 Value, yours FREE!*
Gift #2:
You Get A Tactical “Covert” Rifle Carrying Soft Case
Because we want to over-deliver, we will also put your rifle, plus the three magazines all inside a convenient Tactical Soft Rifle case.
This is already way more useful than a cardboard box and gives you a way to store and transport your new rifle. But, it gets even better! we’ve chosen the Savior Equipment Specialist Covert Rifle Case! This 34×30″ padded, single rifle carrying case makes it easy to conceal and carry your rifle with you to the range or wherever you need it!
This is a $79 Value, Yours FREE!
Gift #3:
You Get PROOF of Our Sub-MOA Accuracy Guarantee and DOCUMENTATION OF THE 5.56 AMMO THAT SHOT IT!
First, you already know that your Patriot Patrol AR-15 is guaranteed to be Sub-MOA or less accurate.
And we’ll not only give you the target that proves it from our proof-testing…
But, we’ll also give you documentation of the particular ammunition we used to shoot your 1-MOA or better groups!
The fact is, that certain rifle barrels like certain types of ammunition, and even though one brand and weight of match ammo may shoot great in one rifle, your barrel may like something different…
This way, you’ll have the proof of the exact brand and box of ammo that was used to shoot the most accurate groups in your particular rifle!
This is a $50 Value, YOURS FREE!
Gift #4:
You Get The AR-15 Armorer’s
Cleaning & Maintenance Video Course
Your rifle will quickly become useless if you don’t know how to clean and maintain it to keep it running for thousands of rounds and decades of use… That’s why we had Carter, who is an expert at building custom rifles create this special video training course just for you!
- Discover the absolute BEST way to quickly and easily clean and maintain your rifles.
- See the exact checklist a professional rifle builder uses to inspect critical parts for wear-and-tear
- You’ll see when you know certain parts will break in the near future and how to replace them to keep your rifle running
- Plus, much, MUCH MORE!
You can use this video course again and again to refresh and revisit these life-saving rifle maintenance skills so you never forget. This is another $49 Value, yours FREE!
Gift #5:
You Get FREE Shipping!
We started this company to build the best firearms for American Patriots…
And we are dedicated to over-delivering in every way possible.
That’s why instead of charging you the $50 it will cost to ship your rifle to your FFL, we are going to cover the costs of shipping for you!
This is another $50 value, yours FREE!
Gift #6:
You Get To Attend Our 2-Day Patriot Rifle Course
a $1,500 Value—Absolutely FREE!
Click play on the video above for a preview of our 2-Day Patriot Rifle Class – a $1,500 value – YOURS FREE!
This is one of the most exciting bonuses and gifts that I can give you…
In fact, it’s one of my “secret” reasons that I decided to start manufacturing firearms…
Simply put, I want to help raise the minimum standards, capabilities and skills of all gun owners in America… That’s why I started Patriot Training Center where we teach live training courses to people like you…
The 2-Day Patriot Rifle course is our flagship rifle/carbine course that every American should take! This is a 2-day, LIVE, hands-on training event where you will discover how to effectively use and fight with your rifle from CQB (Close Quarters Battle) distances of 7-10yds—all the way out to 300+yds.
This is exactly what you need if you own not just our Patriot Patrol AR-15, but ANY rifle… And, the fact is, you need this class even if you only have your rifle for home defense… Or you want to know how to use it if you and your neighbors ever have to team up to defend your neighborhood…
Or you simply have it because it’s fun to shoot at the range.
Normally, you’d have to invest $1,500 to take this course, but I’m giving you a FREE certificate so you can come take the class with your new Patriot Patrol AR-15 on me!
Over $5,273 In Value:
Let’s quickly add up the value here, so you can see everything you’re getting…
The Patriot Patrol AR-15 will be offered in the future for MSRP $3,500
- Gift #1: You get the THREE 30-Round Magpul AR-15 Magazines – a $45 Value!
- Gift #2: You get the Tactical Rifle Soft Case – a $79 Value!
- Gift #3: You get the Sub-MOA Proof Target and Documentation of Ammo – a $50 Value!
- Gift #4: You get the Armorers AR-15 Cleaning & Maintenance Video Course – a $49 Value!
- Gift #5: You get FREE Shipping of the rifle to your FFL – a $50 Value!
- Gift #6: You get a FREE 2-Day Patriot Rifle class certificate – a $1,500 Value!
If you add it up, that’s over $5,273 in value!
But, as long as you’re one of the first people to respond today,
your investment is only $2,497!
WARNING: These Rifles Won’t Last Long
— We Only Have 20 14 Available!
The fact is: we are only offering 20 complete rifles at this time.
And while we can’t update this page every time there’s a new order, at the time of writing this page there are only 20 14 left!
In other words, there is a very real limit here on how many people can get the Patriot Patrol AR-15…
That means, if you are in the market for an AR-15… and… you want to buy a custom-built rifle that is already “done”…
Then… this might just be your best opportunity to do it.
But you must act FAST.
Remember, Buying Guns Online Is 100% Legal, You Just Have To Follow These Rules…
Some people don’t realize that it’s perfectly legal to buy firearms online. There are only a couple of rules …
- You must be 18 years or older (or 21 if your state requires you to be 21 to own a rifle)
- You cannot have the rifle shipped to you or your home address. You must locate a FFL (Federal Firearm License) dealer in your area where the rifle will be shipped to (the easiest thing to do is just use your closest gun shop, and all you have to do is email us their FFL information). We then ship the gun to your FFL when it is built.
- When you pickup your rifle from your local FFL, they will perform an “FFL Transfer” of the rifle into your hands.
- Be sure that you are legally eligible to purchase the standard AR-15 rifle in YOUR state (Residents of MD, CA, NY, NJ, CT, WA, etc – please be aware of the laws concerning owning an AR-15 in your state and make sure you can actually own this rifle BEFORE you buy it!)
And that’s about it. Just the standard stuff really. If you’ve ever bought a gun from a gun store in person, or at a gun show, or online, then you already qualify.
California Residents ONLY Will Receive “California Compliant”
CompMag 10-Round Fixed Magazine Solution
If you are a California resident, then here’s some good news…
Even though California has some of the most strict anti-gun AR-15 laws on the books, we can sell you this exact rifle as a “California Compliant” version by installing the AR-15 CompMag Gen 3 fixed magazine (pictured below).
The CompMag Instantly locks into your firearm and can be easily removed by breaking your action, removing the lock cover on the magazine, and pushing out the mag with the release tool. The release tool is included with your CompMag.
The GEN.3 CompMag automatically locks into your firearm once it is inserted.
This unique fixed magazine design creates a 10-round ammunition feeding device designed to be contained in or permanently attached to a firearm in such a manner that it cannot be removed without disassembly of the firearm action.
This allows you to keep the AR-15 features you love and that we designed into your rifle (pistol grip, retractable stock, flash hider, etc) while still being compliant under California laws.
No need to “break your action” or deviate from the normal operation of your firearm to reload.
It also loads easier than a standard magazine. No heavy spring to push each round against and will fully load on a closed or open bolt.
Because it’s not a permanent modification to the function of your rifle, it’s also very easy to remove, should you decide to shoot outside of California.
The CompMag solution can be used in California and other restrictive firearm states (check your local and state laws before ordering if you live in a restrictive state other than California).
Why Everyone Who Wants One Can NOT Get This Rifle:
First, as I said we are only initially producing 20 of these rifles…
Second, as I’ve shown you numerous times, for the highest levels of quality control…
Your rifle is hand-built AFTER you place your order today.
That means, this is NOT like Amazon Prime and you will NOT receive your rifle immediately…
In fact, you may have to wait up to 90-days to receive your rifle…
If you can NOT wait this long, then please do NOT order…
Only people that recognize that quality and doing things “the right way” the first time are the most important…
And are willing to wait for it…
Will be able to order this rifle.
You will be required to agree to these terms and conditions before your order can be placed today.
The Time To Get Your Patriot Patrol AR-15 is NOW
(There Are Only 20 14 Left)
Look, there’s no hard sell here …
Either you know you want this rifle and you’re already reaching for your credit card… or… this probably isn’t for you.
The truth is:
Because this letter is going out to over 190,000+ of my most active readers…
Anyone who delays on this will be too late.
In fact, I know that a few people who want this rifle are going to place their order – but we’ll just have to refund their money because they weren’t fast enough (it’s just simple math).
Again, we only have 20 rifles in total—so once the first 20 people reserve theirs—they’re gone!
In other words, if you want a rifle, this might be your ONLY chance.
And don’t forget, you’re getting more than $5,273 in value when you claim your rifle…
It’s all yours today as long as you’re one of the few lucky people to say yes for just one payment of $2,497 today.
Here’s How To Order And Exactly What To Do Next:
First, simply check the box below to acknowledge that you understand your rifle is being hand-built AFTER you order and you are comfortable with the current lead time…
(You will not be allowed to place an order, unless the box is checked to agree to these terms)
Then, click the link below to make sure you don’t miss out on this exclusive opportunity…
If you click the link below and it says “Sold Out” then that means we have sold all 20 of these rifles and you’ll have to wait until this opportunity is available again…
[Click Here To Order Your Rifle]
FAQ
Frequently Asked Questions (FAQ):
QUESTION: How Do You Buy A Gun Online?
Some people don’t realize that it’s perfectly legal to buy firearms online. There are only a couple of rules, but it’s basically like buying a gun from any gun shop. You cannot have guns shipped to you or your home address. You must locate a FFL (Federal Firearm License) dealer (aka gun shop) in your area where the rifle will be shipped to (the easiest thing to do is just use your closest gun shop, and all you have to do is email us their FFL information). When you pickup your rifle from your local FFL, they will perform an “FFL Transfer” of the rifle into your hands.
QUESTION: How do you get the rifle to me if I live out of your area?
It’s very simple. You guy the gun, we ship the rifle to a specific FFL licensed dealer in your state (this is the local gun shop of your choice). We can NOT ship out of the United States. If we ship the rifle out of state no Alabama state taxes will be charged and we will give you FREE shipping!
QUESTION: How are your AR-15’s different from a store bought AR-15? or Why should I buy an AR-15 from you instead of the local gun shop?
There are budget level or entry level brands, mid-tier brands and high-end custom firearms. We build high-end firearms that are designed to be run hard by the end user. By carefully selecting each component based on the impact each part has on the entire weapon platform… by carefully choosing the most reliable and robust parts… and by hand-fitting all components together and testing before the gun ever leaves the shop…
QUESTION: Is there a warranty for the firearms you build?
Yes, we cover all our firearms with our 100% Bulletproof Lifetime Guarantee
QUESTION: How much time does it take to build me my rifle?
Every rifle is built by hand. Every rifle undergoes our Multi-Step Quality Inspection Process. Because of the hands-on nature of our custom gun manufacturing–the current lead time is 90-days from the time you buy until the day it shows up at your local gun shop.
QUESTION: Is this rifle or gun legal in my state?
Ultimately, this is your responsibility as the local state/city laws vary from place to place. Be sure that you are legally eligible to purchase the standard AR-15 rifle in YOUR state (Residents of MD, CA, NY, NJ, CT, etc – please be aware of the laws concerning owning an AR-15 in your state and make sure you can actually own this rifle BEFORE you buy it!) If you have any questions, you can contact us for help, and we can figure it out.
QUESTION: What materials do you use in your firearms?
We use only high-quality materials in our firearms. Our rifles, pistols, and shotguns are made from aircraft-grade aluminum and high-strength steel components to ensure maximum durability and reliability.
QUESTION: What is your customer service contact information?
You can reach our customer service team by phone at 1-855-927-4668 or by email at [email protected]. We are available Monday through Friday from 9am to 5pm EST.
QUESTION: Do you offer any discounts or promotions for bulk purchases?
Yes, we offer discounts and promotions for bulk purchases. Please contact our sales team at [email protected] for more information on pricing and availability.
*QUESTION: If I live in CA, NY, or any of the states with magazine bans or restrictions – will I receive the Three 30-Round Magpul Magazines?
ANSWER: No, if you live in a state with magazine capacity restrictions or other so-called “Assault Weapon” bans, you will not receive the bonus gift of three additional 30-round magazines if it’s not legal in your state. For example, California residents will receive only one CompMag 10-round magazine to comply with the assault weapon ban and magazine capacity restrictions in California.